AFT Tube Models
- 14 inch- Part No. M09-218
- 16 inch- Part No. M09-029
Aft Tube
Click Photo to Expand Details
Part No. M03-225
The Adjustable-Height Offset Pedestal is designed to provide a gunner with a 360° field-of-fire while firing heavy machine guns between wheel wells of a small cargo bed (e.g., Toyota Hilux). At the end of the offset, arm is an adjustable-height tube with built-in Universal Pintle Adapter (UPA). MSG provides a wide variety of vehicle cargo bed interface plate designs and installation kits.
Adjustable-Height Offset Pedestal
Click Photo to Expand Details
Pintle Post Models
- 17 inch- Part No. M09-052
- 19 inch- Part No. M09-028
- 32 inch- Part No. M09-051
Pintle Post
Click Photo to Expand Details
HMMWV External A-Pillar Mounting Bracket
Part No. M09-020
Works only with a low profile air intake and front right windshield removed.
HMMWV External A-Pillar Mounting Bracket
Click Photo to Expand Details
Part No. M09-150 Curbside
Part No. M09-152 Roadside
HMMWV B-Pillar Adjustable Height Mounting Bracket
Click Photo to Expand Details
Flat-Base Mounting Bracket
Part No. M09-190
The Adjustable-Height Flat Base Mounting Bracket allows for mounting any MSG swing arm to a flat surface. In addition, the mounting pintle is adjustable to accommodate different gunner heights.
Flat-Base Mounting Bracket
Click Photo to Expand Details
Part No. M09-160 Short Pintle
Part No. M09-199 Long Pintle
The Adjustable-Height Dash Mounting Bracket attaches to the inside of the door frame up against the front dash as shown on the A-Pillar.
Adjustable-Height Dash Mounting Bracket
Click Photo to Expand Details
Part No. M10-600
The Adjustable-Height Pintle adapter drops into the same receptacle as a bearing sleeve, Gunner Protection Kit on a M1167 TOW HMMWV, or into a flat based bearing sleeve receiver.
Adjustable-Height Pintle Adapter
Click Photo to Expand Details
- Part No. M14-001
- The Pedestal Offset Pintle (POP) is a seated rotating gun mount pedestal with an offset pintle socket. It can accommodate light to heavy machine guns.
- The POP is designed for complete 360 degree turns inside the wheel wells of vehicles, including HMMWVs and pick-up trucks. A brake secures the system when the weapon is fired. A travel lock is used when the system is unmanned.
- The POP accepts a standard HMMWV turret Bearing Sleeve or an MK16 MOD8 stand. The seat height is adjustable. It can be ordered with various base and seat back heights. MSG has designed interface plates for easy attachment to the HMMWV cargo bed and other boats and trucks. The base comes in carbon or stainless steel.
Pedestal Offset Pintle (POP)
Click Photo to Expand Details
MK16 MOD9 Tripod Assembly
Part No. M03-602
The MK16 Tripod was designed primarily for naval use, but can also be used in vehicle applications. The top plate of the tripod has a four-hole pattern that accepts a wide variety of stands, pedestals, and swing arm systems. The MK16 tripod is made from non-corrosive steel. It is designed to handle all weapons up to any heavy machine gun, including twin .50 Cal M2s.
MK16 MOD9 Tripod Assembly
Click Photo to Expand Details
Part No. M03-350
The MSG Adjustable-Height Pedestal is designed to be mounted in a cargo bed of any pick-up style truck behind the cab. This mounting location gives the maximum amount of space in the bed for other equipment, while providing a gunner with approximately 180° field-of-fire. The pedestal has an adjustable upper tube to accommodate a wide variety of gunner heights. This upper tube is machined to accept a standard Bearing Sleeve, which then mounts any weapon system. This allows for a wide variety of MSG-designed mounting brackets for swing arm systems, optics, and non-lethal devices. A wide variety of vehicle cargo bed interface plates are available.
Adjustable Height Pedestal
Click Photo to Expand Details
Have a Question? Need help determining your needs? We're ready to serve you.
